ISSN (online): 1996-1944
Journal Sheet: Materials

Call of the Journal:


×
- Additive Manufacturing Methods and Modeling Approaches

- Advanced Carbon Materials in Water Treatment or Separations Technology

- Advanced Functional Hybrid Materials for Novel Biomolecular Electronics

- Advances in Biomaterials | Design, Synthesis, Characterisation and Biomedical Application

- Advances in Construction and Building Materials

- Advances in Green Construction Materials

- Assessment of Metallurgical and Mechanical Properties of Welded Joints via Numerical Simulation and Experiments

- Carbon Compounds-Reinforced Ceramics

- Concrete and Waterproofing Materials | Development of Waterproofing Technology for Buildings and Civil Concrete Structures

- Corrosion Inhibitors for Steel | Experimental and Theoretical Studies

- Damage and Failure of Polymers, Polymer-Like Materials, Adhesives and Polymer Nanocomposites

- Development of Energy Storage or Conversion Element Based on Various Nano Materials

- Dyes | Synthesis, Properties, and Applications

- Dynamic Behavior of Ceramic Composites

- Flexible Sensors and Actuators for Novel Wearable Solutions

- Fundamentals and Applications of Bionano Sensor Techniques

- Graphene Foam Based Composites

- Growth and Application of Foam-Based Materials

- High Performance Concrete

- Hybrid Noble Metal/Graphene Aerogels | Synthesis, Characterization and Applications for Chemical Sensing and Biosensing

- Hydrogen Storage and Fuel Cells | Materials, Characterization and Applications

- Load Test and Numerical Analysis on Construction Materials

- Machining and Surface Properties of Steel Parts

- Materials under Extreme Conditions | Technologies for CRMs Reduction, Substitution and Recovery

- Microplastics and Nanoplastics | From Resource to Pollution

- Mineral-Bonded Composites for Enhanced Structural Impact Safety

- Modification and Processing of Biodegradable Polymers

- Nanostructured Semiconductors for Photoinduced Applications

- Novel Inorganic Adsorbents for Environmental Purification

- Numerical Simulation and Experimental Studies of Wave Phenomena in Composite Materials

- Performance Research of Polyurethane Foams and Composites

- Physics, Electrical and Structural Properties of Dielectric Layers

- Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels

- Processing and Thermal Properties of Hybrid Composites

- Recent Advances in 3D Printing for Biomaterials

- Recent Progress in the Development, Material Properties, and Post-Processing of Additively Manufactured Components

- Silica and Silica-based Materials for Biotechnology, Polymer Composites and Environmental Protection

- Study on the Modification and Compressive Properties of Concrete Buildings Materials

- Superconductors for Opto-Nano and Micro-Electro-Mechanical Systems (O-N/MEMS)

- Synthesis and Characterization of Hybrid Nanomaterials and Nanocomposites

- Synthesis, Properties and Applications of Polymer Blends

- Testing of Materials and Elements in Civil Engineering

- The Science and Technology of 3D Printing

Year of the Pubblication: 2021
31
Jan
2021
Paper Submission Deadline
30
Dec
2021
Publishing Date

Add to Calendar 01/31/2021 08:00 Europe/Rome Novel Inorganic Adsorbents for Environmental Purification

This Special Issue, entitled New inorganic Adsorbents for Environmental Purification, is devoted to the characteristics and synthesis of inorganic materials such as metal oxides, hydroxyapatite, mesoporous silica, zeolites, clays, and hybrid materials with their application in the adsorption of cations and anions, intended mainly for solving environmental problems. The publication must include innovative synthesis strategies to obtain low-cost materials or transplant functionality to improve their adsorption capacity and selectivity. Papers including reviews and scientific research results are acceptable. The main subject of interest of many scientific and industrial centers is the preparation of new, modern, and technologically advanced materials that are at the same time low cost, readily available, and effective in operation, while also minimizing the process times. Inorganic compounds, their modification, and composites are one of the most important groups in this area. The release of heavy metals and other pollutants into water and soil as a result of human agricultural and industrial activities can pose a serious threat to the environment and human health. There are many processes for the removal of dissolved heavy metal ions. Recently the emphasis has been put on the use of cheaper alternative materials as potential sorbents for heavy metal removal. Hydroxyapatite, clay, oxides, and their derivatives and composites can be a good choice.
Keywords: clay minerals; zeolites; hydroxyapatite; metal oxides; composites.

Switzerland
CALL FOR PAPERS
Code: CFP-M110-SI7_2021
Posting date: 06/11/2020

Novel Inorganic Adsorbents for Environmental Purification


Aims and Scope

This Special Issue, entitled New inorganic Adsorbents for Environmental Purification, is devoted to the characteristics and synthesis of inorganic materials such as metal oxides, hydroxyapatite, mesoporous silica, zeolites, clays, and hybrid materials with their application in the adsorption of cations and anions, intended mainly for solving environmental problems. The publication must include innovative synthesis strategies to obtain low-cost materials or transplant functionality to improve their adsorption capacity and selectivity. Papers including reviews and scientific research results are acceptable. The main subject of interest of many scientific and industrial centers is the preparation of new, modern, and technologically advanced materials that are at the same time low cost, readily available, and effective in operation, while also minimizing the process times. Inorganic compounds, their modification, and composites are one of the most important groups in this area. The release of heavy metals and other pollutants into water and soil as a result of human agricultural and industrial activities can pose a serious threat to the environment and human health. There are many processes for the removal of dissolved heavy metal ions. Recently the emphasis has been put on the use of cheaper alternative materials as potential sorbents for heavy metal removal. Hydroxyapatite, clay, oxides, and their derivatives and composites can be a good choice.
Keywords: clay minerals; zeolites; hydroxyapatite; metal oxides; composites.

Languages
English
Country
Switzerland
Topics
Advanced Materials, Green Materials, Materials, Natural Materials, Water Pollution
Review process
The Journal adopts double-blind peer review process
Indexed By

ADS-Astrophysics Data System, AGORA(FAO), CAB Abstracts(CABI), Chemical Abstracts (ACS), Current Contents-Engineering, Computing & Technology (Clarivate Analytics), DOAJ, Ei Compendex/Engineering Village (Elsevier), Genamics JournalSeek, Global Health (CABI), HINARI (WHO), Inspec (IET), Journal Citation Reports/Science Edition (Clarivate Analytics), Julkaisufoorumi Publication Forum (Federation of Finnish Learned Societies), Norwegian Register for Scientific Journals, Series and Publishers (NSD), Polymer Library (Smithers Rapra), PubMed (NLM), Science Citation Index Expanded – Web of Science (Clarivate Analytics), Scopus (Elsevier), Web of Science (Clarivate Analytics), Zetoc (British Library), CLOCKSS (Digital Archive), e-Helvetica (Swiss National Library Digital Archive), PubMed Central (NLM), Academic OneFile (Gale/Cengage Learning), EBSCOhost (EBSCO Publishing), Energy & Power Source (EBSCO), Engineering Source (EBSCO), Google Scholar, J-Gate (Informatics India), Materials Science & Engineering (ProQuest).

APC

Info at: www.mdpi.com/journal/materials/apc

Submit by website
Call webpage
Additional Notice from the Editor

Guest Editors
Dr. Agnieszka Gładysz-Płaska
Dr. Ewa Skwarek